DO NOT use this machine unless you have been instructed

in its safe use and operation and have been given permission

Description of Work:

Using a High Pressure Cleaner

Potential hazards:

i Airborne waste

i High pressure water

i Electricity

i Trip hazards

PROTECTIVE EQUIPMENT REQUIRED

PRE-OPERATION

ü Check that the work area and walkway are free of obstacles and trip hazards

ü Check that the work area is physically isolated from traffic

ü Check that work area is clearly sign posted to prevent traffic

ü Ensure all electrical leads are raised above the ground to keep them out of water

ü A safety switch or residual current device (RCD) must be used

ü Ensure you are familiar with all machine operations and controls per the manufacturer’s instructions

ü Locate and ensure you are familiar with the operation of the ON/OFF starter

ü Read Safety Data Sheet for any chemicals being used and comply with product manufacturer’s directions

ü Faulty equipment must not be used. Immediately report suspect equipment

SAFE OPERATION

ü Control direction and pressure of water splash at all times

ü Never aim spray at another person

ü Wear wet weather clothing to prevent clothing being wet with chemicals or contaminated water

ü Maintain complete control. Always operate with both hands. Maintain a proper & steady footing at all times

ü Turn off immediately after use. Before making any adjustments, disconnect the plug from the power source and bring the machine to a complete standstill

POST-OPERATION

ü Turn off power

ü De-pressurise unit

ü Tidy away hoses

ü Leave the machine and the workspace in a safe, clean and tidy state

DON’T

û Do not use faulty equipment. Immediately report suspect equipment

û Do not point the lance at another person Do not hold work piece with gloves, cloth, apron