Health & Safety > Safe Work Procedure for Wet/Dry Vacuum Cleaner
Authorised by Windward Manager
Revised Date: 22 April 2020
DO NOT use this machine unless you have been instructed in its safe use and operation and have been given permission | ||||||
| ||||||
Description of Work: |
Using a Wet/Dry Vacuum Cleaner | |||||
|
Potential hazards: | |||||
i Trip hazard i Noise |
i Back and shoulder strain | |||||
PROTECTIVE EQUIPMENT REQUIRED | ||||||
|
|
|
|
| ||
PRE-OPERATION ü Ensure equipment is free of any signs of wear or damage. Check the power cord is not damaged in any way ü Operator to inspect work area to ensure that work surface is even and stable to prevent slips, trips and falls ü Wear the appropriate PPE ü Identify on/off switch
SAFE OPERATION ü When you start up the vacuum, listen for unusual noises or vibrations ü Caution! Switch the appliance off immediately in case foam or liquid escape! ü The appliance is not suitable for vacuuming coolants and lubricants, unless expressly specified otherwise ü If not indicated differently in the operating instructions of the appliance, liquid media must only be vacuumed up to a temperature of 45°C.
POST-OPERATION ü Turn off the power supply when work is complete ü Switch off the appliance and, in case of appliances connected to the mains, pull out the power cord before cleaning and performing any maintenance tasks on the machine. Shut the device off when switching to a different function ü The water level limiter must be cleaned regularly and checked for signs of damage ü Do not clean the vacuum with a water hose or high pressure water jet (danger of short circuits or other damage) ü Ensure equipment is returned to storage area after use
DON’T û Humans and animals must not be vacuumed with this appliance û Do not leave vacuum cleaner connected if work area is to be unattended û Never vacuum up the following materials: o Explosive or combustible gases, liquids and dust particles (reactive dust particles) o Reactive metal dust particles (such as aluminium, magnesium, zinc) in combination with highly alkaline or acidic detergents o Undiluted, strong acids and alkalis o Organic solvents (such as petrol, paint thinners, acetone, heating oil) o burning or glowing objects In addition, these substances may cause the appliance materials to corrode
|